Notifications
Clear all
Topic starter
A lot of resin problems actually start before the pour.
For larger epoxy projects, especially river tables or deeper castings, surface prep, moisture control, mold sealing, and temperature can make a huge difference in the final result. Even a good resin system can struggle if the wood is too wet, the mold leaks, or the workspace temperature changes too much during curing.
One thing we’ve noticed at Bond Craftor is that makers often focus heavily on mixing and pouring, but preparation usually determines whether the finish comes out clean and consistent.
For anyone planning a larger pour, our Deep Pour Epoxy Resin is currently on a limited-time promotion, including special pricing on 3-, 6-, and 12-gallon options.
For those of you who work with epoxy or casting resin, what step do you think beginners underestimate the most?
Would be interested to hear what has made the biggest difference in your own projects.
Posted : 15/09/2026 6:51 am
For me, it's definitely cleaning the mold or surface properly before pouring. I used to rush this step, thinking a quick wipe was enough, and ended up with cloudy casts and weird streaks more times than I'd like to admit. Now I take a few extra minutes with isopropyl alcohol and a lint-free cloth, and the difference is night and day. It feels like a small thing, but it's the one step that consistently saves me from redoing a whole pour.
Posted : 17/09/2026 1:25 pm