Notifications
Clear all
Topic starter
I have bought PIR Motion Detector Sensor but I don't know how to set and change the time and sensing coverage area, my sensor setting requirement time 5 seconds, coverage area maximum 1.5 meters.
Posted : 11/05/2023 9:57 am
From the datasheet you've linked - is something not clear?
Blockade time: 2.5s (Default)
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).
Take everything I say with a pinch of salt, I might be wrong!
(Cybertruck avatar is a riff on my inability to deliver my designs in reasonable time so far.)
Posted : 12/05/2023 12:50 pm